Atop Technology MB5416A2 User manual - Manual (Page 27)

Atop Modbus Gateway
MB54XX-X Series
User’s Manual V 1.1
24
3.4 Network Configuration
In this section, IP, Subnet Mask and overall connectivity settings can be accessed. When on
Redundancy Mode the device will have the two LAN ports connected
1
to the Network, but the
signal will flow through one of them. In the case one line is out due to any reason there will still
be another route so the signal can keep flowing.
Fig. 3. 8
Note 1 : you can still connect only one LAN port to the device, though you can still change the settings in it, there won’t
be a Redundancy function.