Atop Technology MB5001C User Manual - Manual (Page 20)

User Manual Version 1.0
MB5001C series 1-port Modbus Gateway
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
19
3.3.4 Configure COM1 Settings
Figure 3.21 Com1 Setup
Note :
1. The default Baud Rate of MB5001C is 9600 and it is associated with serial port COM respectively.
2. The default value for data packet delimiter is 0. When the delimiter is set to 0 (Auto), MB5001C will
automatically chooses the optimal delimiter according to the baud rate.
3. The “COM Type Selection” will show different port interface according to its selected port type.
4. After configuring the parameters, click on the “Save Configuration” button to save the changes, please
notice that the setting will not become effective until click “restart”.
3.3.5 Modbus Settings
Figure 3.22 Modbus Setup