2 auto ip (dynamic ip) – Atop Technology MB5001C User Manual User Manual
Page 11
User Manual Version 1.0
MB5001C series 1-port Modbus Gateway
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
10
Figure 3.2 Static IP setup dialog window
3.1.2 Auto IP (Dynamic IP)
A DHCP server can automatically assign the IP address and network settings. MB5001C supports the DHCP
function. By default, the DHCP function on MB5001C is disabled; one can use DeviceView software to
search network information automatically by following steps：
->Execute DeviceView (Figure 3.1)
->Click on the IP address of MB5001C in DeviceView
-
>Click “Config” button(It will pop-up Dialog Window)
-
>Check ”Auto IP” (Figure 3.3)
-
>Click “ Config Now” button(The MB5001C will restart and get IP from DHCP server automatically)
Figure 3.3 DeviceView Auto IP Dialog Window