Plug in and tweak the waterfalls, Trim the liner, Mulch the berm – Aquascape MicroPond & MicroPondless Kits (99763, 99764, 99765 & 99769) User Manual

Page 13: Clean up, Step 15, Step 16, Step 17, Step 18

Plug in and tweak the waterfalls

• As soon as the MicroPondless

or MicroPond

is filled and all

of the black waterfall foam is

dry (if used on project), you

may plug the pump in and test

the waterfall.

• You can tweak the waterfall by

placing smaller stones and gravel

on the waterfall cascades. This

will change the appearance and

sound of the water. Have fun

playing with the water coming

over the falls until you achieve the

desired effect.

Trim the liner

• With everything running, go

around the perimeter of the

pond with a pair of scissors and

trim off any excess liner, always

leaving several inches above the

water level as a precaution. The

remaining liner edges can be

covered with gravel.

Note: Do not trim the liner until the

waterfall is running and the pond

is filled to the desired level.

Prematurely trimming the liner

may cause leaks!

Mulch the berm

• The entire area surrounding the

basin can now be mulched and

any surrounding plants added.

Clean up

• You’re at the final stages of the

project! All that is needed now is

to clean up the mess you’ve made

around the yard.

STEP 15

PD/PL

STEP 16

PD/PL

STEP 17

PD/PL

STEP 18

PD/PL