Anchor NAVI-TRAC LITE 20 WIDE - Manual (Page 14)

FABRIC TENSIONING
Adjacent top fabric panels are tensioned together
at each upright (leg) of the tent.
As shown at the right, the tension straps of each
catenary tensioning arch interlink through the pull
ring of the adjacent fabric panel (fig. 40). Both
tension straps then join at the top double hook
of a web ratchet strap. The bottom of the web
ratchet strap is then hooked into a slot in the
upright and ratcheted so that the catenaries of
both top panels are tensioned at once (fig. 41).
When tensioning a panel, be sure that it is
secured by the web ratchets on both sides of
the tent before beginning to ratchet either of the
catenaries tight, otherwise the panel may simply
move toward the opposite side.
After the catenary is tensioned, velcro the adja-
cent valances together (fig. 42).
NOTE: IN THIS PHOTO, THE TENT WALLS
HAVE ALREADY BEEN INSTALLED.
TO SLOT IN
UPRIGHT
WEB RATCHET
DOUBLE HOOK
MID
#2 OR
HIP
MID
#1
TENSION
STRAP #2
TENSION
STRAP #1
PULL
RING
VELCRO FLAP
GUY WEB
DOUBLE
HOOK
TENSION
STRAPS
WEB
RATCHET
UPRIGHT
DOUBLE
HOOK
MID
#1
MID #2
OR HIP
TENSIONING SYSTEM COMPLETE
(SHOWN WITH WALLS INSTALLED)
40
41
14