Anchor NAVI-TRAC 30 WIDE HIP-END - Manual (Page 15)

INSTALLING MID BAY PURLINS AND EAVE/RIDGE BARS
NOTE: FABRIC ONLY INDICATED, SO
THAT FRAME WILL BE MORE VISIBLE.
FOR PURLINS & EAVE/RIDGE BARS,
INSTALL HOOK END FIRST, THEN
THEN 90 DEGREE OPPOSITE END.
UNITS WITH (1)
MIDDLE BAY
NOTE: FABRIC ONLY INDICATED, SO
THAT FRAME WILL BE MORE VISIBLE.
ADJUST TO DESIRED SPACING
AND FIT END CONNECTORS OVER
GUIDE PEGS ON BASEPLATES.
NOTE: FOR FREQUENT INSTALLATIONS,
THE PURCHASE OF A 2ND GUIDE BAR
COULD BE HELPFUL.
THE EXTENDED RECTANGULAR UNIT ALWAYS INCLUDES (2) HIP END
MODULES FACING EACH OTHER WITH THE DESIRED NUMBER OF
10’, 15’ OR 20’ MIDDLE BAYS SEPARATING THEM. NOTE: UNLIKE
THE RIGID EAVE AND LOWER RAFTER CONNECTIONS OF THE END
MODULE, MIDDLE BAYS USE DROP-IN PURLINS AND EAVE/RIDGE BARS.
NOTE: ONLY FIXED-BASE
UPRIGHTS ARE TO BE
USED IN END MODULES.
(2) END MODULES
FACING EACH OTHER.
1
2
3 5
4
15
FOR EASE OF ASSEMBLY,
MAKE CONNECTIONS IN
ORDER AS NUMBERED.