Allworx for iOS - Manual (Page 37)

Reach for iOS 1.1 User Guide
Toll Free 1-800-ALLWORX * 585-421-3850 Page 29
wwww.allworx.com
Revised: 6/10/14
The SIP Port and the AMDS Port settings are the TCP ports for communicating with the
Allworx Server for SIP phone signaling and for authentication, presence, and voicemail
access. In most cases, the default values are correct. However, if the Allworx Server
Administrator requires configuration changes that require accessing these services on
different ports, adjust these fields to the new values.
9.4 My Handset
Users can add a new Allworx Reach handset or delete an existing Allworx Reach
handset. When creating a new handset, the system adds the device to the primary
extension call route. If there are no Allworx Reach licenses, available, users cannot
Create a Handset.
To add a new handset:
1. Tap My Handset and the Install new handset on this device page displays.
2. Select an option to add a new handset. If no eligible licenses are available, an error
message displays indicating the device is not eligible to install a new handset.
Create New – displays the number of licenses available to the user and the number
of available licenses in the system. Tapping this option enables the phone options on
the device.
Reserved – indicates the Allworx Server Administrator has saved a license, but the
user has not claimed the license.
Migrate handset from another device – displays a list of available Reach devices
the user can move the licenses from. Tap an existing Reach device to move the
license to the current Reach device.
To delete a handset:
Field Input
Server IP Address Provided by the Allworx Server Administrator.
Username Provided by the Allworx Server Administrator.
Password Provided by the Allworx Server Administrator.
SIP Port Default value is 5060.
AMDS Port Default value is 8081.