Allworx for iOS - Manual (Page 36)

Reach for iOS 1.1 User Guide
Page 28 Toll Free 1-800-ALLWORX * 585-421-3850
wwww.allworx.com
Revised: 6/10/14
9.3 My Server
9.3.1 Login
Input the server information provided by the Allworx Server Administrator, and then tap
the Login button.
9.3.2 Change Password
If the Allworx server is using server software 7.7 or later, users can change the password
to a new password at anytime. Tap the Change Password button. The Change
Password page opens. Fill in the fields, and tap Change Password. The Allworx Reach
application automatically logs in and is ready for use.
The Allworx Server Administrator can require users to enter strong passwords and/or
change the password at login.
To change password at initial setup and configuration:
1. Setup and configure the Allworx Reach application. See “Setup” on page 3 and
“Login” on page 28 for more information. An Error message displays indicating a
password change is required. Tap OK. The Allworx Reach application immediately
opens the Change Password window.
2. Enter a new password, and then confirm the new password. If the Allworx Server
Administrator requires strong passwords, helpful hints display under the Save/Cancel
buttons for the password requirements.
3. Tap Save Password . The Allworx Reach application proceeds to setting up a
handset.
To change password at login:
1. Launch the Allworx Reach application on the device. The device displays a message
indicating to change the password.
2. Tap Change Password Now. Enter the Old password, New password, and Confirm
password. If the Allworx Server Administrator requires strong passwords, helpful
hints display under the Save/Cancel buttons for the password requirements.
3. Tap Save Password . The device is ready to use.