AirLive WN-200USB - Manual (Page 35)

3. Configuration of WN-200USB
AirLive WN-200USB User’s Manual 32
5. Right-click “Wireless Network Connection” (it may have a number as suffix if you have
more than one wireless network card, please make sure you right-click the AirLive
802.11n Wireless Dongle), then select “View Available Wireless Networks”.
6. All wireless access points in proximity will be displayed here. If the access point you
want to use is not displayed here, please try to move your computer closer to the access
point, or you can click ‘Refresh network list’ to rescan access points. Click the access
point you want to use if it’s shown, then click ‘Connect’.
7. If the access point is protected by encryption, you have to input its security key or