AirLive WN-200USB - Manual (Page 19)

3. Configuration of WN-200USB
AirLive WN-200USB User’s Manual 16
Authentication It will indicate the current authentication mode in use.
Encryption It shows the wireless security that the wireless
network is using.
Network Type This will indicate "Infrastructure" or "Ad-hoc".
IP Address It shows the current IP address on the wireless
interface.
Subnet Mask Subnet mask for the current IP address.
Default Gateway Gateway IP address associated with the current IP
address.
HT It displays current HT status in use (802.11n wireless
card only).
Link Quality It displays connection quality based on signal strength
and TX/RX packet error rate.
Signal Strength (1~3) It receives signal strength (1~3), user can choose to
display as percentage or dBm format.
Noise Strength It displays noise signal strength.
Link Speed It will show current transmit rate and receive rate.
Throughout It displays transmits and receive throughput in unit of
Mbps.
3.2.4 Profile Screen
Click “Add to Profile” button on the Network tab, or you can choose “Profile” tab of Top
Menu, then click “Add” button, the Add Profile window will pop up. Users can setup the
general settings, encryption and authentication settings and so on.