AirLive WN-200USB - Manual (Page 31)

3. Configuration of WN-200USB
AirLive WN-200USB User’s Manual 28
Rescan Click this button to update information on surrounding wireless
network.
Information Display the information about WPS on the selected network. List
information includes Authentication Type, Encryption Type,
Config Methods, Device Password ID, Selected Registrar, State,
Version, AP Setup Locked, UUID-E and RF Bands.
PIN Code Enter the PIN code displayed in the following field to the WPS
screen of the access point. When STA is Enrollee, you can use
"Renew" button to re-generate new PIN Code.
Config Mode Our station role-playing as an Enrollee or an external Registrar.
Detail Information about Security and Key in the credential.
Connect Click this button to connect to the selected network inside
credentials.
Rotate Click this button to rotate to connect to the next network inside
credentials.
Disconnect Click this to stop WPS action and disconnect this active link, and
then select the last profile at the Profile Page of utility if exist. If
there is an empty profile page, the driver will select any
non-security AP.
Export Profile Export all credentials to Profile.
Delete Click to Delete an existing credential. And then select the next
credential if exist. If there is an empty credential, the driver will
select any non-security AP.
PIN Start to add to Registrar using PIN configuration method. If STA
Registrar, remember that enter PIN Code read from your
Enrollee before starting PIN.
PBC Start to add to AP using PBC configuration method.
WPS associate
IE Send the association request with WPS IE during WPS setup. It
is optional for STA.
WPS Probe IE Send the probe request with WPS IE during WPS setup. It is
optional for STA.
Progress Bar Display rate of progress from Start to Connected status.
Status Bar Display currently WPS Status.