AirLive WN-200USB User Manual
Page 21
3. Configuration of WN-200USB
AirLive WN-200USB User’s Manual
18
SSID
If the desired wireless network is currently available, you
can select its SSID. Otherwise, type in the SSID of the
desired wireless network.
Power Save Mode Select either CAM (Constantly Awake Mode) or PSM
(Power Saving Mode).
RTS Threshold
Select a value within the range of 0 to 2347 bytes
Fragment
Threshold
Select the value from 256 to 2346 bytes. The default
value is 2346.
Network Type
Select the desired option:
z
Infrastructure: Select this to connect to an Access
point.
z
Ad-Hoc: Select this if you are connecting directly to
another computer.
Tx Power
Select the Tx (transmission) power according to the real
environment.
Preamble
The preamble defines the length of the CRC (cyclic
redundancy check). Select either Auto or Long Preamble.
OK button
Click this button to save the settings and close the page.
Cancel button
The "Cancel" button will discard any data you have
entered and exit the page.
3.2.4.2 Auth./Encyp.