AirLive WN-200USB - Manual (Page 33)

3. Configuration of WN-200USB
AirLive WN-200USB User’s Manual 30
This tab shows the following information:
z
Utility Version, Date
z Driver Version, Date
z EEPROM Version
z Firmware Version
z Phy_Address
3.3 Using Windows Zero Configuration
Windows XP and Vista has a built-in wireless network configuration utility, called as
‘Windows Zero Configuration’ (WZC). You can also use WZC to configure your wireless
network parameter:
1. Right-click the icon of AirLive Wireless LAN Utility and select “Use Zero Configuration
as Configuration utility”.
2. Right click Windows Zero Configuration icon and select “View Available Wireless
Networks”. If you can not find the icon, please follow the procedures from step 3 to step
5.
3. Click “Start” button (should be located at the bottom-left corner of windows desktop),
click “Control Panel”, then click “Network and Internet Connections” in Control
Panel.