AirLive WN-200USB - Manual (Page 30)

3. Configuration of WN-200USB
27
AirLive WN-200USB User’s Manual
MAC Address Enter the remote system which you want to connect with.
When you want to enable this function, you have to make
sure that your wireless network supports WMM function and
then enter the MAC address of the adapter which wants to
connect with the remote system.
Timeout Value The utility performs time-outs so that the program does not
sit idle waiting for input that may never come. Set a value to
apply to the system with WMM.
Apply Click this button to save the changes you made.
Tear Down Click this button will disconnect the selected Direct Link
Setup.
3.2.8 WPS Screen
WPS (Wi-Fi Protected Setup) can simplify the process of connecting any device to the
wireless network by using the push button configuration (PBC) on the Wireless Access Point,
or entering a PIN code.
You will use the WPS screen when you try to connect the wireless network with the WPS
function.
WPS AP List It displays the information of surrounding APs with WPS IE from
last scan result. List information includes SSID, BSSID,
Channel, ID (Device Password ID) and Security-Enabled.