AirLive WN-200USB - Manual (Page 29)

3. Configuration of WN-200USB
AirLive WN-200USB User’s Manual 26
Duplicate Frames
Received Frames received more than twice.
Reset Counter Click the button to reset counters to zero.
3.2.7 WMM Screen
Click WMM tab in the Top Menu, and you will see the following screen:
WMM Enable WMM is short for Wi-Fi Multimedia. It is a standard created
to define quality of service (QoS) in Wi-Fi networks. It is a
precursor to the upcoming IEEE802.11e WLAN QoS draft
standard, which is meant to improve audio, video and voice
applications transmitted over Wi-Fi. WMM adds prioritized
capabilities to Wi-Fi networks and optimizes their
performance when multiple concurring applications, each
with different latency and throughput requirements, compete
for network resources. Click the check box and then click
"Apply" button to apply this function to the system.
WMM - POWER
SAVE ENABLE Click the check box, and select the desired type of power
saving mode.
Direct Link Setup
Enable Enable the check box and you may start to set MAC
Address, Timeout Value and check the DLS Status. Click
"Apply" button and this setting will be applied to the system.