AirLive WIAS-3200N - Manual (Page 75)

9. Networking Features of a Gateway
AirLive WIAS-3200N User’s Manual
72
9.3 Port and IP Redirect
Configure Port and IP Redirect, go to: Network >> NAT >> Port and IP Redirect.
This function allows the administrator to set 40 sets of the IP addresses at most for
redirection purpose. When the user attempts to connect to a destination IP address listed
here, the connection packet will be converted and redirected to the corresponding
destination. Please enter the “IP Address” and “Port” of Destination, and the “IP
Address” and “Port” of Translated to Destination. Select “TCP” or “UDP” for the
service’s type. These settings will become effective immediately after clicking Apply.