AirLive WIAS-3200N - Manual (Page 56)

6. Restrain the Users
53 AirLive WIAS-3200N User’s Manual
If the Protocol Type is IP, it will need to define Protocol Number.
2) Firewall Rules
After the custom protocol is defined or just use the Predefined Service Protocols, you will
need to enable the Firewall Rule to apply these protocols.
o Firewall Rules: Click the number of filter Rule No. to edit individual rules and
click Apply to save the settings. The rule status will show on the list. Check
“Active” checkbox and click Apply to enable that rule.
Rule No.1 has the highest priority; Rule No.2 has the second priority and so on.
Each firewall rule is defined by Source, Destination and Pass/Block action.
Optionally, a Firewall Rule Schedule can be set to specify when the firewall rule
is enforced. It can be set to Always, Recurring or One Time.
Selecting the Filter Rule Number 1 as an example: