AirLive RS-2000 - Manual (Page 65)

６４
Configuring the Interface Settings
LAN Interface
Using the LAN Interface, the Administrator sets up the LAN network. The LAN network will
use a private IP scheme. The private IP network will not be routable on the Internet.
IP Address: The private IP address of the Bandwidth Manager’s LAN network is the IP
address of the LAN port of the device. The default IP address is 192.168.1.1.
If the new LAN IP Address is not 192.168.1.1, the Administrator needs to set the IP Address
on the computer to be on the same subnet as the Bandwidth Manager and restart the System
to make the new IP address effective. For example, if the Bandwidth Manager’s new LAN IP
Address is 172.16.0.1, then enter the new LAN IP Address 172.16.0.1 in the URL field of
browser to connect to Bandwidth Manager.
NetMask: This is the netmask of the LAN network. The default netmask of the device is
255.255.255.0.
Ping: Select this to allow the LAN network to ping the IP Address of the Bandwidth Manager.
If set to enable, the device will respond to ping packets from the LAN network.
WebUI: Select this to allow the device WEBUI to be accessed from the LAN network.