Route table, Entering the route table screen, Route table functions – AirLive RS-2000 User Manual

Page 39

Text mode
Original mode

３８

Route Table

In this section, the Administrator can add static routes for the networks.

Entering the Route Table screen

Click System on the left side menu bar, then click Route Table below it. The Route Table
window appears, in which current route settings are shown.

Route Table functions

Interface: Destination network , LAN or WAN networks.

Destination IP: IP address of destination network.

NetMask: Netmask of destination network.

Gateway: Gateway IP address for connecting to destination network.

Configure: Change settings in the route table.