AirLive RS-2000 - Manual (Page 172)

１７１
Outgoing
This section describes steps to create policies for packets and services from the LAN network
to the WAN network.
Entering the Outgoing window:
Click Policy on the left hand side menu bar, then click Outgoing under it. A window will
appear with a table displaying currently defined Outgoing policies.
The fields in the Outgoing window are:
! Source: source network addresses that are specified in the LAN section of Address
menu, or all the LAN network addresses.
! Destination: destination network addresses that are specified in the WAN section of
the Address menu, or all of the WAN network addresses.
! Service: specify services provided by WAN network servers.
! Action: control actions to permit or deny packets from LAN networks to WAN
network travelling through the Bandwidth Manager.
! Option: specify the monitoring functions on packets from LAN networks to WAN
networks travelling through the Bandwidth Manager.
! Configure: modify settings.
! Move: this sets the priority of the policies, number 1 being the highest priority.