AirLive RS-2000 - Manual (Page 22)

２１
Date/Time
Synchronizing the Bandwidth Manager with the System Clock
The administrator can configure the Bandwidth Manager.s date and time by either syncing
to an Internet Network Time Server (NTP) or by syncing to your computer.s clock.
Follow these steps to sync to an Internet Time Server
Step 1. Enable synchronization by checking the box .
Step 2. Click the down arrow to select the offset time from GMT.
Step 3. Enter the Server IP Address or Server name with which you want to
synchronize.
Step 4. Update system clock every 5 minutes You can set the interval
time to synchronize with outside servers. If you set it to 0, it means
the device will not synchronize automatically.
Follow this step to sync to your computer’s clock.
Step 1. Click on the Sync button.
Click the OK button below to apply the setting or click Cancel to discard
changes.