AirLive RS-2000 - Manual (Page 173)

１７２
Adding a new Outgoing Policy
Step 1: Click on the New Entry button and the Add New Policy window will appear.
Step 2:
Source Address: Select the name of the LAN network from the drop down list. The drop
down list contains the names of all LAN networks defined in the LAN section of the Address
menu. To create a new source address, please go to the LAN section under the Address
menu.
Destination Address: Select the name of the WAN network from the drop down list. The
drop down list contains the names of all WAN networks defined in the WAN section of the
Address window. To create a new destination address, please go to the WAN section under
the Address menu.
Service: Specified services provided by WAN net work servers. These are
services/application that are allowed to pass from the LAN network to the WAN network.
Choose ANY for all services.
Action: Select Permit or Deny from the drop down list to allow or reject the packets travelling
between the source network and the destination network.