Dhcp, Entering the dhcp window, Dhcp address functions – AirLive RS-2000 User Manual

Page 43

４２

DHCP

In the section, the Administrator can configure DHCP (Dynamic Host Configuration Protocol)
settings for the LAN (LAN) network.

Entering the DHCP window

Step 1. Click System on the left hand side menu bar, then click DHCP below it. The DHCP

window appears in which current DHCP settings are shown on the screen.

DHCP Address functions

Enable DHCP Support：Enable /Disable DCHP Support
!

Domain Name：Enter the Domain Name of DHCP

Automatically Get DNS：Automatically detect DNS Server.

DNS Server 1 : Enter the distributed IP address of DNS Server1.

DNS Server 2 : Enter the distributed IP address of DNS Server2.

WINS Server 1 : Enter the distributed IP address of WINS Server1.

WINS Server 2 : Enter the distributed IP address of WINS Server2.