Incoming, Enter incoming window – AirLive RS-2000 User Manual

Page 180

Text mode
Original mode

１７９

Incoming

This chapter describes steps to create policies for packets and services from the WAN
network to the LAN network including Mapped IP and Virtual Server.

Enter Incoming window

Step 1: Click Incoming under the Policy menu to enter the Incoming window. The

Incoming table will display current defined policies from the WAN network to
assigned Mapped IP or Virtual Server.

Step 2: The fields of the Incoming window are:

Source: source networks which are specified in the WAN section of the Address

menu, or all the WAN network addresses.

Destination: destination networks, which are IP Mapping addresses or Virtual server

network addresses created in Virtual Server menu.

Service: services supported by Virtual Servers (or Mapped IP).