AirLive POE-GSH2004L-370 - Manual (Page 69)

4. Web Management
 Root ID:
Show root bridge ID of this network segment. If this switch is a root bridge, the “This switch
is Root” will show this switch’s bridge ID.
 Root Priority:
This parameter configures the spanning tree priority globally for this Root. The device with
the highest priority becomes the STP root device. However, if all devices have the same
priority, the device with the lowest MAC address will then become the root device. Number
between 0 - 61440 in increments of 4096. Therefore, there are 16 distinct values.
 Root Port:
A forwarding port that is the closest to the root bridge in terms of path cost
 Hello Time:
Interval (in seconds) at which the root device transmits a configuration message (BPDU
frame). Number between 1-10 (default is 2).
 Max Age:
Show the root bridge’s current max age time.
 Forward Delay:
Show the root bridge’s forward delay time.
 Topology:
Show the root bridge’s spanning tree topology.
AirLive POE-GSH2004L-370 User’s Manual
64