beautypg.com

3 installation site preparation, 4 rack mounting – AirLive POE-GSH2004L-370 User Manual

Page 15

background image

2. Installation of the Switch

2.3 Installation Site Preparation

You can mount

POE-GSH2004L-370 either on desktop or on a 19-inch rack. If you plan to

mount the switch on desktop, please choose a steady, level surface in a well-ventilated
area that is free from excessive dust. In any case, the installation site chosen for your
switch has to comply with the following requirements:

The surface where you want to mount the switch must be able to sustain at least 2.4kg.

Do not place heavy objects (more than 3kg) on top of the switch.

The location must preferably be free from excessive dust, away from heat vent, hot-air

exhaust and direct sunlight.

The switch should not be placed near large electric motors or other strong

electromagnetic sources. As a reference, the strength of the electromagnetic field on
site should not exceed the (RFC) standards for IEC 801-3, Level 2(3V/M) field strength.

The air temperature in the location should be within a range of 32 to 122 °F (0 to 50°C).

The relative humidity in the location should not exceed 90% non-condensing humidity.

The distance between the RJ-45 port and the standard network interface should not

exceed 100 meters.

Adequate space should be allowed in front of all the ports, so that each port is easily

accessible for cable connections.

Leave at least 10cm(4 inch) of space around the switch to allow heating dissipation

2.4 Rack Mounting

The

POE-GSH2004L-370 can be mounted on a standard size 19-inch rack, which can in

turn be placed in a wiring closet with other equipment.

Before you can mount the switch on the rack, first you must attach the mounting brackets
on both sides of the switch with screws, and then mount it as a unit on the rack.

To mount the unit on a rack, please follow the steps below:

Step 1. First, align the holes on the bracket with the holes on both side of the switch.

Step 2. Insert screws into the holes and then fasten the bracket on one side of the switch

with a screwdriver.

AirLive POE-GSH2004L-370 User’s Manual

10