AirLive POE-GSH2004L-370 User Manual

Page 23

4. Web Management

Step 1. Double click on the network connection status icon on the task bar. This

should bring up a window showing the status of the current network
connection. If there is no network status icon on the task bar, please go to
the “

Start -> Settings -> Network -> Local Connection” of the task bar’s

Start menu.

Step 2. Clock on the “property” icon.
Step 3. Double click on the “Internet Protocol (TCP/IP)
Step 4. Click on “Use the following IP address” button and enter the computer’s

address manually. This IP address must be on the same subnet as the
switch but different from the switch’s IP. Please make sure the IP is not
used by other network device. If the switch’s IP address is of factory’s
default value. We recommend enter the following for computer’s IP:

IP Address:

192.168.2.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.2.1

Click “

Ok” after finish entering the IP.

※

Note1: The POE-GSH2004L-370 has DHCP client ability. This allows DHCP server (or

router) to assign IP automatically. However, we do not recommend turning on the DHCP
client because the DHCP server assign the IP randomly. The DHCP client should be used
only when connecting directly to Cable Modem (for remote management) whose service
provider uses DHCP for IP assignment.

Now, you will be able to access the switch by typing in the switch’s IP address on the web
browser.

AirLive POE-GSH2004L-370 User’s Manual