AirLive POE-GSH2004L-370 - Manual (Page 42)

4. Web Management
4.4.6 PoE with device guard
In PoE section, users can configure Power over Ethernet enabled or not for each port.
Device Guard function can monitor PoE IP cameras and Access Points activities. When
device crash or not responding, it will reboot the device automatically.
4.4.6.1 PoE Configuration
In PoE Port Management function, user can configure the settings about PoE.
The switch complies with IEEE 802.3af/at protocol and be capable of detecting
automatically that whether the device linked to the port on the switch is PD (Powered
Device) or not. The switch also manage the power supplement based on the Class of the
PD, and it will stop supplying the power once the power required by the PD excesses the
Class, Short Circuit or over temperature occurs.
 PoE Enabled:
To evoke to enable which port supply the power to the PD.
AirLive POE-GSH2004L-370 User’s Manual 37