AirLive POE-GSH2004L-370 - Manual (Page 56)

4. Web Management
 Port:
Local port number
 State:
Show the status on the port.
 Protocol Enabled:
Controls whether Loop Detection is enabled on this switch port.
When Port No is chosen and enable port' s Loop detection, the port can detect loop
happens and port will be Locked. If Loop did not happen, port maintains Unlocked.
 Unlock port:
When ticking the port, port locked will be opened and turned into unlocked. If not ticking the
port, Port maintains locked.
4.4.13 Broadcast Strom Protection
When the broadcast packets received by the switch exceed the threshold configured, the
port will be blocked for a period of time which can be set. After a configured time, the switch
will detect whether the broadcast packets received on the port still exceed the threshold. If
the broadcast traffic is still higher than, the port will be closed for a period of time again. If
the broadcast traffic is under the threshold, the port will re-open and forward the packets
normally.
AirLive POE-GSH2004L-370 User’s Manual 51