AirLive POE-GSH2004L-370 - Manual (Page 18)

2. Installation of the Switch
10BASE-T 100 ohm Category 3, 4, 5 UTP/STP cable
100BASE-TX 100 ohm Category 5 UTP/STP cable
1000BASE-T
100 ohm Category 5 UTP/STP cable or better (CAT 5E
recommended)
Auto MDI/MDI-X function
The POE-GSH2004L-370 is equipped with Auto-MDI/MDI-X function, which allows you to
use straight-through cable even when connecting to another switch/hub. Simply use the
straight-through cable for all types of 10/100BASE-TX connections, either to a PC or to a
networking device such as other hub or switch.
10 /100Base-TX and 1000Base-TPorts
Interface RJ-45
Cable to Use
To an end station Straight-through twisted-pair cable
To a hub/switch Straight-through twisted-pair cable
Maximum Distance 100 meters
Table 2-2 Cabling type for 10/100BASE-TX and 1000Base-T
2.7 Connecting to Power
POE-GSH2004L-370 features a universal auto-select power supply unit, which allows a
power connection to a wide range of input voltages from 100 to 240VAC @ 50 ~ 60Hz.
To establish its power connection, simply plug the female end of the power cord into the
power connector on the rear of the switch and the male end of the power cord into a
suitable power outlet. Once you have correctly plugged in the power, you can then turn on
the Power Switch to activate the switch.
Connection
Specification
AirLive POE-GSH2004L-370 User’s Manual 13