AirLive POE-GSH2004L-370 - Manual (Page 45)

4. Web Management
 Guard Pkts
To Enable the Guard pkts function.
 Guard IP address
To Enable the Guard IP address function, please key in IP address of the PoE device. The
switch will ping the devices, if there is no reply. The switch will do the failure action. Please
remember that do not disable the Ping echo function in your PoE devices.
 Interval time
To set the interval time. The switch will ping the IP after Interval time.
 Retry time
To set that how many time that the switch will retry when the Pin is not reply.
 Failure action
To set the action when PoE device is detected that it is failure. There are two opinion,
nothing and reboot.
 Reboot
To set how many time this switch will wait, when reboot is required by device guard.
AirLive POE-GSH2004L-370 User’s Manual
40