AirLive POE-GSH2004L-370 - Manual (Page 55)

4. Web Management
4.4.12 Loop Detection
The loop detection is used to detect the presence of traffic. When switch receives packet’s
(looping detection frame) MAC address the same as oneself from port, show Loop
detection happens. The port will be locked when it received the looping detection frames. If
you want to resume the locked port, please find out the looping path and take off the
looping path, then select “Unlock port” and click on “Apply” to turn on the locked ports.
AirLive POE-GSH2004L-370 User’s Manual
50