31 stp bridge settings (qos setting), 31 stp bridge settings – AirLive POE-FSH2422G-250 User Manual

Page 43

4. Web Management

AirLive POE-FSH2422G-250 User’s Manual

4.31 STP Bridge Settings

(QoS Setting)

Bridge Priority: This parameter configures the spanning tree priority globally for this

switch. The device with the highest priority becomes the STP root device. However, if all

devices have the same priority, the device with the lowest MAC address will then

become the root device. Number between 0 - 61440 in increments of 4096. Therefore,

there are 16 distinct values.

Hello Time: Interval (in seconds) at which the root device transmits a configuration

message (BPDU frame). Number between 1-10 (default is 2).

Max Age – The maximum time (in seconds) a device can wait without receiving a

configuration message before attempting to reconfigure. That also means the maximum

life time for a BPDU frame. Number between 6-40 (default is 20).

Forward Delay: The maximum time (in seconds) the root device will wait before

changing states (i.e., discarding to learning to forwarding). Number between 4 – 30

(default is 15)