AirLive POE-FSH2422G-250 - Manual (Page 28)

4. Web Management
AirLive POE-FSH2422G-250 User’s Manual 23
efault Setting -
Hardware Base is described as following.
The purpose of this function is to provide a method for the network administrator to restore
all configurations to the default value.
Step 1. To activate this function, the user should follow the following procedures.
Press the “Load l see the LED blinking.
button for hardware base reset. More detail information about Load D
default” button, then you wil
Step 2. When LED starts blinking, it means the CPU is executing the “load default”
procedure. You can release the button now.
After completing this procedure, all the factory default value will be restored. It includes the
IP address, the user name, the password and all switch configurations.
4.9 Firmware Update (Administrator menu)
Before
and then press is a
self-pr
though the pow firmware update procedure,
the Boot loader will restore the code to firmware update page.
the firmware update procedure is executed, you should enter the password twice
Update button. The smart switch will erase the flash memory. There
otection mechanism in the Boot Loader, so the Boot Loader will keep intact. Even
er is turned off or the cable link fails during the
After pressing Update button, the old web code will be erased. Then you can select the
image file and press “update” button to update the firmware you need.
4.10 Reboot Device (Administrator menu)
Click Confirm button to reboot the device.