AirLive POE-FSH2422G-250 - Manual (Page 35)

4. Web Management
AirLive POE-FSH2422G-250 User’s Manual
30
ration.
You should change to either Add or Remove Tag.
ot
„ Don’t care means the outgoing packet of the selected port keep the original packet
received at the source port. This is the default setting when starting VLAN configu
„ Remove tag means the 802.1Q tag of the outgoing packet of the selected port will n
be sent. Use this setting for your Network Connections to PCs. Only packets of the
VLAN Group the Port is member of will be sent.
4.1
The ports need to be made member of your VLAN groups. This is for Tag Based and Port
t whether you run Tag Based or Port
Based Mode.
9 VLAN Member (VLAN Setting)
Based VLAN Mode. The screen here looks differen
VLAN Member in Port Based Mode
In Port Based Mode you see a matrix of your 24 Ports. Simply select the port on top screen
you want to configure, click on Read, and then select or deselect the ports that are on the
same VLAN group. In this configuration mode you do not need to worry about defining
VLAN groups and VLAN IDs.