AirLive POE-FSH2422G-250 - Manual (Page 34)

4. Web Management
AirLive POE-FSH2422G-250 User’s Manual 29
„ Multi to 1 Setting
In the following sessions, we will talk in detail about the management functions under the
„ VLAN Mode
„ VLAN Member
VLAN Setting menu.
4.18 VLAN Mode (VLAN Setting)
ort-based VLAN is for separating traffic only
etwork traffic within VLAN groups to other
switches. For the handover to other switches use Tag Based VLAN. In VLAN Mode you can
ince here the
andover between the switches of your network takes place.
You may select the VLAN Mode of the switch. P
on this single switch. There is no handover of n
switch from Tag to Port Based VLAN. Port Based VLAN is the default mode.
After switching to Tag Based VLAN Mode, the screen changes. On this screen you can
now define and configure your Up- and Downlink ports. These are important s
h
„ VLAN Mode: Displays VLAN mode: port based/Tag based VLAN. Here you can also
switch back to Port Based VLAN Mode
„ Add tag means the outgoing packet of the selected port will be inserted a 802.1Q tag.
Use this setting for your Up- and Downlink Ports in your VLAN Tagged Network.