AirLive POE-FSH2422G-250 - Manual (Page 22)

4. Web Management
AirLive POE-FSH2422G-250 User’s Manual 17
switch but different from the switch’s IP. Please make sure the IP is not
used by other network device. If the switch’s IP address is of factory’s
default value. We recommend enter the following for computer’s IP:
IP Address: 192.168.2.101
Subnet Mask: 255.255.255.0
Gateway: 192.168.2.254
Click “Okay” after finish entering the IP.
*Note1: If IP address of the switch is lost, please reset the switch to factory default setting
via the reset button.
*Note2: The POE-FSH2422G-250 has DHCP client ability. This allows DHCP server (or
router) to assign IP automatically. However, we do not recommend turning on the DHCP
client because the DHCP server assign the IP randomly. The DHCP client should be used
only when connecting directly to Cable Modem (for remote management) whose service
provider uses DHCP for IP assignment.
Now, you will be able to access the switch by typing in the switch’s IP address on the web
browser.
4.2 Remote Management
In this section, you will learn how to setup your computer and the router for remote web
management. Remote management allows MIS to manage a switch from outside of the
switch’s IP domain or from Internet. Depending on the type of Internet connection you
have, there are two ways to setup the switch to be available through Internet.
Direct Connection to Internet