AirLive FE-200CU - Manual (Page 43)

4. Administrating the Device
AirLive FE-200CU Manual 37
z Manual setting:
Click this option to set time and date manually.
z Time zone:
Set the time difference from Greenwich Mean Time in the area where the device is
installed.
4.6.4 Server Maintenance
This page provides functions for the system maintenance of the device. Reboot and Load
default settings; as well as functionalities of launching upgrade process, backup/restore
user settings and language defines.
z Reboot:
The device is restarted without changing any of the network settings. I t means the IP
address of the device will not change after firmware upgrade.
z Load Default (Excluding Network setting):
The unit is restarted and most current settings are reset to factory default values.
This action will not reset the network setting.
z Factory Default (Including Network setting):
Recall the device hard factory default settings. Note that click this button will reset all
device’s parameters to the factory settings (including the IP address).