AirLive FE-200CU - Manual (Page 13)

1. Introduction
AirLive FE-200CU Manual 7
1.5 Install the Camera in LAN
1. Plug an Ethernet cable into the Camera
Connect an Ethernet cable to the LAN socket and attach it into the network.
2. Connect the external power supply to Camera
Connect the attached power adapter to the DC power jack of the camera.
Note: Use the power adapter, 12VDC, included in the package and connect it to wall
outlet for AC power.
Once you have installed the camera well and powered it on, the power LED (orange) will
turn on later. The power LED turns on, it means the system is booting up successfully.
Furthermore, if you have a proper network connection, and access to the camera, the
LAN LED (green) will flash.