AirLive FE-200CU - Manual (Page 17)

2. Preparation
AirLive FE-200CU Manual 11
(2) Enable UPnP NAT traversal option of the Network Camera
Refer to Setting Î Network Î UPnP page for detail NAT traversal setting.
Note that this option is default enabled.
(3) Access your Network Camera by DIPS
Refer to Setting Î System Î System page for detail DIPS information.
2.4 Access the Device from the Internet Explorer for the First
Time
1. Start the web browser on the computer and type the IP address of the Camera you want
to monitor as below:
The Login Window of the Camera is prompted:
2. Type in your login name and password under “USERNAME” and “PASSWORD” textbox.
For the first time use (default value), input the
User Name: admin
Password: airlive
After typing in “admin” on the “USERNAME” and “airlive” on the “PASSWORD”, click
“OK” button to start the main menu.