AirLive FE-200CU - Manual (Page 29)

4. Administrating the Device
AirLive FE-200CU Manual 23
z Infrared (IR) Cut Filter:
The default is automatically switched according to the light intensity. “Enable”
indicates the filter is enable to cut IR light to make sure the color is correct. “Disable”
indicates the filter is disabled and allows the infrared (such as IR LED illuminator) to
enter the camera to execute low lux surveillance application.
z Day / Night Threshold:
The threshold to change Day or Night mode. The default is 20 lux. It indicates that
when the lux is lower than 20 lux, the camera will automatically change to night mode
and allow Infrared to enter the camera.
z Color/Mono Mode:
The default is automatically switched according to light intensity. It can also be
forced to display color image even in a low light environment.
z Camera Mount:
Choose camera mounting type: Wall, Ceiling and 720P Wall Mount.
1. Wall Mount:
For Choosing Wall mount type, go back to Live view. There are 4 kinds of video
layout to choose, including Original view, Broad view, Quad with source view and
Triple view.
(1) Original view:
(2) Broad view: