AiM EVO4 - Manual (Page 9)

CHAPTER 3 LINKS, SENSORS AND CONFIGURATIONS
16 1 17
Here are the different EVO4 connection
possibilities:
n To ECU
n To RPM signal
n To speed signal
n To analog inputs
n To expansions
n To the optical lap time receiver
When connecting EVO4 to a sensor, to ECU,
or to an expansion module, you must also
configure it in order to make EVO4 record
the proper data.
In particular, per every channel you have to
define:
n The connected sensor
n The frequency acquisition of the sensor
n The unit of measure
Please use Aim software RaceStudio2
for system configuration.
RaceStudio2
Configuration.
In this chapter it is explained how to confi-
gure EVO4 with RaceStudio2 software.
Connect EVO4 to your PC and run
RaceStudio2.
-> Select the button
"Device Configuration"
-> Select EVO4.
EVO 4
1
You will see this screenshot:
Press the “New” button and fill in the
required fields.
You must now define the parameters of the
system.
Each point will be explained in more depth
in the dedicated chapter.
Links, Sensors
and Configurations.