AiM EVO4 User Manual
Page 18
CHAPTER 7
ANALOG INPUTS
34
35
A triaxial accelerometer is to be properly configured. When selected, the following screen ap-
pears:
On this screen you can define the direction of installation EVO4. Simply select the image con-
sistent with your installation. The three signals from the accelerometer are automatically related
to the proper directions.
EVO 4
After having transmitted the configuration
to EVO4, you must calibrate the sensor by
pressing the button “Transmit”.
The calibration is used to define the range
of some sensors such as potentiometers
and accelerometers.
1
2