Power – AiM EVO4 User Manual
Page 7
12
11
Power.
Power is provided by connecting the appropriate cable to the battery of your vehicle. It is not
necessary to use special attention, because there is a stabilizer that regulates the internal power
supply used by the system.
So you can connect EVO4 without any problem to a NOT stabilized power source from 8 to 24
Volts. Even shutting down the system does not require special attention: when the power is
turned off, a small battery in the system keeps the internal power supply on for a few seconds
in order to properly close the internal data files.
If your power is too spiky, an external power filter (code X60FLCEVO4), is available.
Wiring diagram of external filter X60FLCEVO4
CHAPTER 2
GENERAL INFORMATION
EVO 4