AiM EVO4 - Manual (Page 16)

CHAPTER 6 THE SPEED CHANNEL
30 31
n Speed read from the wheel
EVO4 has two wheel speed inputs, in the
same "speed" connector:
The digital sensor X05SNBS00 detects the
presence of a metallic tooth placed at a di-
stance between 0.5 and 2 mm.
If you wish to acquire two speed inputs, you
must use the cable code: 04.563.02.
EVO 4
n For configuring wheel speed
parameters.
Enter the Program Configuration panel and
after enabling the channel desired speed
(speed 1, speed 2 or both), set the wheel
circumference and the number of pulses
per revolution:
2 1
3