AiM EVO4 User Manual

Page 19

CHAPTER 8

GPS

GPS.

The integrated GPS in EVO4 provides the
following information, updated ten times
per second:

n Position (latitude, longitude, altitude)
n Speed
n Longitudinal acceleration
n Latitudinal acceleration

In the case EVO4 knows the finish line of
the track and split coordinates, it can also
calculate:

n Lap times
n Split times
n Test length

To transmit track information to EVO4, use
GPSManager software, as explained in the
dedicated chapter.

EVO 4

n How to configure

In order to use GPS data to compute lap
times and split times, you have to:

n Properly configure EVO4.
n Transmit EVO4 the coordinates of the

finish line and split lines.

To configure EVO4, access the
“Setup Menu” and set “GPS Lap Timer”.(1)

You can set Finish and Split line coordinates
in two different ways:

n Use the software GPS Manager to tran-
smit information relating to the tracks
where you are going to drive.
EVO4 will automatically recognize the track
and will use the proper coordinates.

n Set the finish line coordinate directly on
the track.
This can be done only if EVO4 is connected
to a dash.