AiM EVO4 - Manual (Page 22)

GPS MANAGER SOFTWARE CHAPTER 8
42 43
How to add a new track to the PC database.
To add a new track
1) Press the button “New”
2) Enter the name of the track.
3) Enter the required information:
Country, Type of circuit (Closed, Oval or
Open) (asphalt, dirt, ice, water).
Finally, using the icon buttons, set the type
of vehicle that usually run on the circuit:
Cars, Motorcycles or Karts.
If you have already run a test on the track
and have downloaded data, you can asso-
ciate the shape of the track, pressing the
“Load Track” button.
You can now select the file“.GPK”,
containing the coordinates of all the points
of your test.
The shape of the track appears, splitted in
different laps of the test. It is possible to
scroll through the different laps, to zoom,
to rotate the drawing.
After having selected the desired lap, push
“OK” for saving the image of that lap.
That image will be used as a reference
shape for the future.
Finish line coordinates are read from the
“.GPK” file but can be modified as desired
in one of the following ways:
Define the coordinate by hand (1)
Position the cursor on the desider point
of the track and click the pushbutton
“Cursor Pos” (2)
In case of a Point to Point track, it is obviou-
sly useful to define the coordinates of the
starting and finish line.
Push “OK” for saving the configuration.
1
2
3
2 1
EVO 4