2N StarPoint manual - Manual (Page 48)

48
Mute
Use the function to temporarily mute the microphone during a call.
Use:
Push the function button during a call. The opponent cannot hear you. The muted state
is signalled by a flashing button LED indicator. Re–push the button to re–activate the
microphone.
Call Recording
Use the function to enable call recording. This function is based on the PBX
administrators's permission to record.
Use:
Push the button with the recording function any time during a call. The active state is
indicated by the button LED. Re–push the button to stop recording.
Do Not Disturb (DND)
Use the function to switch the terminal into the DND (Do Not Disturb) mode. In this
mode, outgoing calls can be set up, but incoming calls are rejected. Missed calls are
shown on the telephone display.
Use:
Push the button with the DND function. The active state is indicated by the button LED.
Re–push the button to deactivate the function.
Profiles
Use the function to set a quick access to the menu. Profiles
Answered Calls
Use the function to set a quick access to the list of answered calls.
Received Messages
Use the function to set a quick access to the list of received messages.
Redial
Use the function to redial the last successfully dialled number (incorrectly dialled
numbers are ignored).
Use:
Push the button with the Redial function and the terminal sets up a call to the
last–dialled number automatically. If the handset is hung up at the moment, the call is
set up in the HandsFree mode.