Automatic switching, Create new profile – 2N StarPoint manual User Manual

Page 35

Automatic Switching

You can switch profiles manually on your telephone, using a service, or bind them with
time conditions and activate automatic switching. Time condition binding can be made

by the system administrator and/or the user through the

web

2N NetStar Assistant

application, where the global time conditions can be used or new user conditions can
be created as necessary. Refer to the

for more details on

NetStar - Assistant manual

profile configuration.

To activate automatic profile switching from your

telephone, select

2N StarPoint

in the

menu using

and

and press

for

Automatic switching

Profiles

confirmation. Automatic profile switching according to time conditions will be activated
automatically.

By activating a profile manually in the automatic profile switching
mode you disable automatic switching.

Create New Profile

A profile may be created by the system administrator or a user using the 2N

terminal or the

web application. Each user may

StarPoint

2N NetStar Assistant

create up to eight profiles.

To create a new profile:

Use the

and

buttons to find the

selection in the

Create new profile

menu and push

for confirmation.

Profiles

Enter the new profile name and confirm with

. A profile name is not allowed

to occur more than once for one user.
A new profile will be created if you have entered a correct name and have not
exceeded the limit of 8 profiles.