2N BRI Lite/Enterprise v1.1 - Manual (Page 92)

Status Messages 6.4
92
7 NWAIT Awaiting GSM log-in SETUP
8 IDLE Rest status, can start/receive call, execute AT&G command CALL/CMD
9 CALL Call running (call establishing, connected call, call end) IDLE
10 CMD Communicating with module upon AT&G command IDLE
13 INFO Information loading from module and SIM card NWAIT
GSM Layer 2 BLOCK Message Status
ID
Name Description
41 (block) Blocked by AT&G command, terminated by module, board or system reset
42 Netw-reg GSM log-in refused (not activated SIM), next attempt in 5..60 minutes
43 Clir-err CLIR activation request refused, next attempt in 2..10 minutes
44 Mod-err Defective or not connected GSM module, next attempt in 2 minutes
45 Pin-err Wrong PIN, permanently in BLOCK status
46 Sim-err Defective or not inserted SIM card, next attempt in 2 minutes
47 Log-out Temporarily logged-out according to parameter X00
48 Puk-req SIM card requires PUK
(undef) This position of SIM card wasn’t checked by gateway
GSM Layer 3 Message Status
ID
Name Description
0 NULL Rest status, ready for call
1 CINIT Request of call to GSM (from Layer 4)
3 OPROC Call to GSM is connected
4 CDELIV Call to GSM is ringing
6 CPRES Indication of call from GSM (from Layer 2)
7 CRECV Call from GSM is ringing on ISDN interface
9 IPROC Call from GSM is processed by ISDN interface
10 ACTIVE Connected call
11 DISREQ Disconnection request (to Layer 2)
12 DISIND Indication of disconnection (from Layer 2)
19 RELREQ Module release for another call (to Layer 2)
25 OVRECV Reading of DTMF dialling from GSM (from Layer 2)
38 RELIND Indication of module release (from Layer2)
Layer 4 Message Status
ID
Name Description
0 NULL Rest status, ready for call
1 MORE Call request received from GSM or ISDN, awaiting further dialling or timeout
2 SETUP Call request sent to opposite interface
3 PROC Call request confirmed, awaiting call answer
4 ACTIVE Connected call
5 DISC Call disconnection in progress